Magellan ProMark3 RTK Specifications download pdf (Page 78)

Getting Started With FAST Survey

Creating a New Job

FAST Survey first asks you to open a job (a crd file). Do the

following:

1. Choose Select New/Existing Job. A new screen is now dis-

played.

2. In the Name field, type in the name of the job you wish to

create. For example, type in “tuto1.crd”.

3. Then tap OK to create the job. The screen then displays

the Units tab.

4. On the Units tab, set the desired units and parameters for

the job.

5. Tap on the GPS tab.

On the GPS tab, choose the coordinate system to be used

in the job as well as the geoid model. A large number of

coordinate systems are stored in FAST Survey. To select

one of them, click on the Edit Projection List button and

then Add Predefined. Some coordinate systems require that

a datum grid (or projection grid) be uploaded before you

are allowed to use them. Some geoids are provided on the

FAST Survey CD and can be installed through the Install

FAST Survey utility (see

Install FAST Survey (and Datum

Grids) on page 253 and Getting ProMark3 Ready for FAST

Survey Installation on page 267). Geoids can also be

uploaded using GNSS Solutions (see Uploading a Geoid to

ProMark3 on page 184).

6. After selecting all the desired parameters, click OK

(located on top of the screen).

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 291 292

No comments

Magellan ProMark3 RTK Specifications Page 78