Magellan ProMark3 RTK Specifications download pdf (Page 115)

101

2. Double-tap the Surveying icon to run the Surveying func-

tion. The screen displays the navigation screen that was

last displayed.

3. Make the settings required when first using the Surveying

function:

• Press the MENU key

• Tap Setup. In the Setup menu, tap successively the

options you need to set. Remember you need to define

the Storage medium (internal memory or SD card) and

the Receiver ID. If you have a ProMark3 RTK, press

the MENU key again, tap

Receiver Mode and then

select

Post-Processing. Skip step 3 when next using the

Surveying function.

4. Press the NAV key until you see the Satellite Status screen

(see opposite). Wait until at least 4 satellites are received.

5. When there is enough satellites received, press the LOG

key. The

Survey Settings screen opens.

6. Tap inside the Survey Mode field and then tap Stop-and-go.

The content of the screen will be different depending on

the choice you make in the Initialize field (see below). This

is explained in detail below.

Satellite Status screen

Initialization method:

1) None 2) With initializer bar 3) On known position

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 291 292

No comments

Magellan ProMark3 RTK Specifications Page 115