Magellan ProMark3 RTK Specifications download pdf (Page 56)

Configuring the Rover

1. Turn on the ProMark3 RTK.

2. Double-tap the DGPS Configuration icon. This opens the

DGPS Configuration window.

3. Tap Select Mode, select UHF and tap OK. Tap OK again to

close the DGPS Configuration window.

Initializing the Rover

1. For a “Bar” initialization, move

the rover antenna from the range

pole to the kinematic bar (see pic-

ture right). For all other initializa-

tion methods, skip step 1.

2. On rover side, double-tap the Sur-

veying icon.

3. Press MENU, tap Receiver Mode,

then

Real-Time.

4. Press MENU and tap Initialize RTK.

5. Select one of the available initiali-

zation methods, from the slowest

to the fastest:

• On The Fly: Initialization will

take place with a free moving rover antenna. If you

choose this option, the message “

Reset RTK Engine is

OK!” will first appear. Just tap OK and then, using the

NAV key, select the Position screen to monitor the ini

tialization process (see screen example in the left col-

umn). When the screen indicates a “Fixed” status for

the position, then the rover is initialized. Refer to

Standard RTK: “Surveying” on page 51 to start your

survey.

• Static: The rover antenna, placed over an unknown

point of your choice, should not be moved until initial-

ization is achieved. If you choose this option, the Ini-

tialization screen will then be displayed (see screen

example in the left column). Skip to step 6.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 291 292

No comments

Magellan ProMark3 RTK Specifications Page 56