Magellan MG5000 User's Guide download pdf (Page 7)

Magellan / Spectra SP 5

Setting the Time & Date

Setting Chime Zones

A chime-enabled zone will advise you every time it is opened by causing your keypad to beep. Each keypad

must be chimed separately.

How do I set the time & date?

1 Press the [

TBL] key.

2 Enter your [

MASTER CODE].

Press the [] key.

4Press [5].

5 Enter time in the [

HH.MM] format. If the HH is equal to 13 or higher, skip to step 7.

6 Select time format. [1] = 24hr; [2] = AM; [3] = PM.

7 Enter the date in the [

YYYY/MM/DD] format. You have now set the time & date. Press [CLEAR] to exit.

How do I chime zones?

•

For K32 and K32RF: Press & hold the [ ] key. The Arm1, Arm2, Stay1, and Stay2 LEDs will flash. Enter

the zone number corresponding to the zones you want to Chime. The corresponding LED will light up.

Press the

[ENTER] key to exit.

For K32I and K32IRF: Press & hold the [ ] key (K32I) or [ ] key (K32IRF). The word Chime will appear on

the screen. Enter the zone number corresponding to the zones you want to Chime. The corresponding LED

will light up. Press the

[ENTER] key to exit. Note: K32IRF will only Chime when powered by AC or when the

display is active.

For K10V, K10H and K636: Press & hold the zone key ([1] to [0(10)]). Accept beep = Chime on

For K32LCD: Press and hold the [ ] key. Press [1] to select which zone to chime or press [2] to configure

chime period. The chime period allows you to specify the time frame in which the zone will chime. Enter the

zone number corresponding to the zones you want to Chime. Press the

[ENTER] key to exit.

How do I disable chime zones?

•

For K32, K32RF, K32I, K32IRF and K32LCD: To disable Chime zones, repeat this process and enter the

zone number to disable a Chime zone, or press [

SLEEP] to disable all Chime zones instead of entering a

zone number.

For K10V, K10H and K636: Press & hold the zone key ([1] to [0(10)]). Fail beep = Chime off.

NOTE: For a description of the confirmation and rejection beeps, see Keypad Feedback on page 7.

To identify your keypad, see page 9.

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

No comments

Magellan MG5000 User's Guide Page 7