Magellan MG5000 User's Guide download pdf (Page 17)

Magellan / Spectra SP 15

Bypassing a Zone

Bypassing a zone allows you to ignore (deactivate) specified zones the next time the system is armed. For

example, you may wish to bypass certain zones when workers are renovating part of your home. Once the

system is disarmed, the bypass entries are erased. When zones are bypassed, the [

BYP] key will illuminate.

Zone bypassing can also be activated by using One-Touch Bypass Programming (see page 15). If One-Touch

Bypass Programming is enabled, press the [

BYP] key for three seconds to enter bypass programming. To

remove the Bypass feature from a zone, in step 3 enter the zone number again or press [

CLEAR] to erase all

current entries. Press [

CLEAR] + [ENTER] to delete bypassed zones.

Bypass Recall Feature

After disarming the system, bypass entries are erased. The Bypass Recall feature reinstates the previous

bypass entries saved in memory. This eliminates the need to manually re-program the bypass entries every time

you arm your system.

One-Touch Arming

One-Touch arming allows you to arm the system without using a user code. This feature must be enabled by

your installer. If One-Touch Arming is programmed, you can increase the security level of your system (from

Disarm Stay Arm Sleep Arm Full Arm) without a code. See Figure 1 below.

One-Touch Regular Arming

Press and hold the [ARM] key to arm all zones in the partition. If partitioned, keys [1] & [2] will flash. You can use

this feature to allow specific individuals like service personnel (e.g. cleaners) to arm without giving them access

to any other alarm system operations. See Regular Arming on page 14.

One-Touch Stay Arming

Press and hold the [STAY] key to arm the perimeter (no Stay zones). See Stay Arming on page 14.

One-Touch Sleep Arming

Press and hold the [SLEEP] key to arm all zones not defined as Sleep zones. See Sleep Arming on page 14.

One-Touch Bypass Programming

Press and hold the [BYP] key to access Bypass programming mode. See Bypassing a Zone on page 17.

Fast Exit

When the system is already Stay or Sleep armed: this feature will allow you to exit already armed premises and

keep the system armed. Press and hold the [

OFF] key for to start the exit delay. After the exit delay has elapsed,

the system will switch to its previous arming mode.

How do I bypass zones?

1 Press the [

BYP] key.

2 Enter [

USER CODE]. The [BYP] key will flash. Press [ENTER] to bypass all open zones or go to step 3.

3 Illuminate the number(s) corresponding to the zone(s) you want to bypass by entering the zone number.

Solid on = Zone open, Flash = Zone bypass, Off = Zone closed, not bypassed.

4 Press the [

ENTER] key to save and exit. Press [CLEAR] twice to exit without saving.

How do I recall bypass entries?

1 Press the [

BYP] key.

2 Enter your [

USER CODE].

3 Press the [

BYP] key.

4 Press the [

ENTER] key.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Comments to this Manuals

No comments

Magellan MG5000 User's Guide Page 17

Comments to this Manuals

Related products and manuals for Security access control systems Magellan MG5000