MG6250 • Menu Programming Guide
Page 19
Programming Sequence
1. Press menu.
2. Select 08-System Setup
menu, then press ok.
3. Enter your installer code
(default: 0000).
4. Select 07-Doorbells sub-
menu, then press ok.
Add Doorbell
5. Select a doorbell to add,
then press ok.
6. Press Tamper or Learn
on the device, or enter its
serial number, then press
ok (see b). Once
completed, the doorbell’s
serial number will be
registered.
NOTE: The MG6250 only supports wireless doorbells.
Record Voice Tag
7. Press ok.
8. Record tag (max. 3
seconds).
9. Play, re-record (no), or
save (yes) tag.
Enter Doorbell Name
10. Press ok.
11. Enter a name (max. 16
characters), then press
ok.
Select Tone
12. Select one of four
available tones, then
press ok.
08-SYSTEM SETUP
ok next back
Add Doorbell1
ok next exit
Press Tamper or
back
(a)
(b)
Serial # [023122]
backclearok
Modify Voice Tag
ok next back
Please Record
after the Tone
Modify Text Name
ok next back
Name: Doorbell01
ok clear back
Tone: Tonality 4
ok next back
Comments to this Manuals